Custom Animation Builder v1 by Phoboshttp://www.swbfgamers.com/index.php?action=dlattach;topic=9847.0;attach=5198 (http://www.swbfgamers.com/index.php?action=dlattach;topic=9847.0;attach=5198)
InstructionsThis new Custom Animation Builder by Phobos features the ability to munge up to 6 custom weapon animations! Common.lvl is not modified at all, the Side and Mission only need to be modded once. Modders can quickly swap out animation models and remunge the
anims.lvl, without having to remunge their side LVL. This allows for unprecedented faster testing of several animations ingame! This is very useful for large mods such as TWD which take forever to remunge. The LUA and ODFs must be initially modified however, to support these new animation banks. Details are explained below for building the new animations and incorporating them into your mods.
1) To start, extract this tool to C:\BFBuilder. Now select the MSH you want to use from the
SWBF2SoldierAnimationBank folder, which contains all SWBF2 animation models. Some of these always crash in SWBF1, such as the Acklay and Greivous. The following animations work well in BF1 as discovered by Phobos and Sereja, and are included by default in the Animations subfolders:
Cannon "Side Slash" = dooku_sabre_stand_attack1b_full
Cannon3 "Dual Bladed Attack" = maul_sabre_stand_dashattack_full
Gam "Zombie Bite" = sidious_sabre_stand_useforce_full
Gam3 "Zombie Swipe" = wampa_sabre_stand_dashattack_full
Tool "Overhead Swing" = vader_sabre_stand_attack1c_full
Tool3 "Smuggler Pistol" = hansolo_pistol_stand_shoot
2) Open CANNON folder and copy 2 MSH files here that you want to use. Name the primary animation
human_lascannon_stand_shoot.msh and the secondary
human_lascannon_stand_shoot3.mshCustomAnimBuilder_v1\CustomAnimationSource\Animations\cannon
3) Repeat the copy process for GAM folder. Name them
human_gam_stand_shoot.msh and
human_gam_stand_shoot3.mshCustomAnimBuilder_v1\CustomAnimationSource\Animations\gam
4) Repeat the copy process for TOOL folder. Name them
human_tool_stand_shoot.msh and
human_tool_stand_shoot3.mshCustomAnimBuilder_v1\CustomAnimationSource\Animations\tool
5) Once all the MSH files are in place, all you do is run the
CustomAnimationMunger.bat This will munge into the animations into 3 ZAABIN and 3 ZAFBIN files. Next, these files are automatically munged into the new
anims.lvl, which is then automatically copied to the required folder after munging
C:\Program Files (x86)\LucasArts\Star Wars Battlefront\GameData\Data\_LVL_PC\SIDE
6) Now all you have to do is replace the MSH files as needed, remunge, and restart the mission. New animations can be munged on the fly and tested much faster using this method. All steps after this only need to be applied once, to the
Side REQ/ODFs and
Mission LUA.
7) Edit the Mission LUA to call on 3 new units ingame, which are referred to as Animation Dummies. These call the custom animations into the game memory. I have chosen to name the dummies based on the animation bank they use for simplicity. The LUA only has to reference these units as part of a native faction, the dummy units should not actually spawn in game. Here is the LUA code to add for this to work
-- Team 3 Stats
AddUnitClass(3, "twd_inf_zombie_flesheater",5)
AddUnitClass(3, "twd_inf_anim_cannon",0) -- keep these at 0
AddUnitClass(3, "twd_inf_anim_gam",0)
AddUnitClass(3, "twd_inf_anim_tool",0)
SetUnitCount(3, 5)
SetTeamAsEnemy(3,DEF)
SetTeamAsFriend(3,ATT)
SetTeamAsEnemy(DEF,3)
SetTeamAsFriend(ATT,3)
8) Before any of the SIDE lvl are called upon, directly after the SOUND section of the mission LUA, you must also add this line
ReadDataFile("SIDE\\anims.lvl")-- SOUND
ReadDataFile("sound\\bes.lvl;bes2gcw");
ReadDataFile("ZOM\\029.lvl;029gcw");
ReadDataFile("ZOM\\zombie.lvl", "zombie");
ReadDataFile("SIDE\\anims.lvl")
-- SIDE
ReadDataFile("ZOM\\TWD.lvl",
"twd_inf_basic");
9) Now you edit the Side REQ and add the 3 Animation Dummies. Here is an example REQ file
ucft
{
REQN
{
"class"
"twd_inf_anim_cannon"
"twd_inf_anim_gam"
"twd_inf_anim_tool"
"twd_inf_human_abraham"
"twd_inf_human_andrea"
"twd_inf_human_bob"
10A) Now you will create the dummy ODFs. Fortunately for you I have created them already, just copy/paste and rename them as referenced in the Mission LUA and Side REQ.
10B) Specify any existing Unit Model for
GeometryName and
GeometryLowRes in your MSH folder. Ghoul is the model I used.
10C) Also change the
WeaponName1 value to any existing weapon in your ODF folder.
10D) The example is for twd_inf_anim_cannon.odf, change the
4 lines for Animation and Skeleton values to GAM and TOOL for the other two dummy ODFs.
[GameObjectClass]
ClassLabel = "soldier"
GeometryName = "Ghoul.msh"
[Properties]
FootWaterSplashEffect = "watersplash_sm"
WaterSplashEffect = "watersplash_md"
WakeWaterSplashEffect = "watersplash_wade"
UnitType = "assault"
IconTexture = "all_soldier_icon"
MapTexture = "troop_icon"
MapScale = 1.6
GeometryName = "Ghoul"
//AnimationName = "all_inf_snowtrooper"
AnimationName = "cannon"
AnimationLowRes = "cannon"
SkeletonName = "cannon"
SkeletonLowRes = "cannon"
FirstPerson = "all\alltroop;all_1st_trooper"
FirstPersonFOV = "70"
ThirdPersonFOV = "65"
GeometryLowRes = "Ghoul_low1"
CapturePosts = 0
CAMERASECTION = "STAND"
EyePointOffset = "0.0 1.8 0.0"
TrackCenter = "0.0 1.8 0.0
TrackOffset = "0.0 0.0 3.5"
TiltValue = "5.0"
CAMERASECTION = "STANDZOOM"
EyePointOffset = "0.0 1.8 0.0"
TrackCenter = "0.0 1.8 0.0
TrackOffset = "0.4 0.05 2.8"
TiltValue = "3.5"
CAMERASECTION = "CROUCH"
EyePointOffset = "0.0 1.3 0.0"
TrackCenter = "0.0 1.3 0.0
TrackOffset = "0.0 0.15 3.5"
TiltValue = "5.0"
CAMERASECTION = "CROUCHZOOM"
EyePointOffset = "0.0 1.3 0.0"
TrackCenter = "0.0 1.3 0.0
TrackOffset = "0.4 0.2 2.8"
TiltValue = "3.5"
CAMERASECTION = "PRONE"
EyePointOffset = "0.0 0.5 0.0"
TrackCenter = "0.0 0.5 0.0"
TrackOffset = "0.0 0.0 3.0"
TiltValue = "5.0"
CAMERASECTION = "PRONEZOOM"
EyePointOffset = "0.0 0.5 0.0"
TrackCenter = "0.0 0.5 0.0"
TrackOffset = "0.4 0.2 2.8"
TiltValue = "3.5"
AimValue = "1.0"
HealthType = "person"
MaxHealth = 1000.0
NoEnterVehicles = 1
Acceleraton = 35.0
MaxSpeed = 3.5
MaxStrafeSpeed = 2.25
MaxTurnSpeed = 2.0
ScanningRange = "50000.0"
TransmitRange = "50000.0"
WeaponName1 = "twd_weap_inf_zombiemelee2"
WeaponAmmo1 = 0
AimFactorPostureSpecial = 50
AimFactorPostureStand = 100
AimFactorPostureCrouch = 140
AimFactorPostureProne = 160
AimFactorStrafe = 60
AimFactorMove = 70
AISizeType = "SOLDIER"
11) There are 3 primary and 3 secondary animations that can be used, for banks CANNON, GAM, and TOOL. Weapons that are
ClassLabel=Melee only support primary animations. Weapons that are
ClassLabel=Cannon, Dispenser, & Grenade support primary and secondary anims.
AnimationBank specifies the custom animation to use.
FireAnim = 2 will call upon the secondary animation, but unfortunately this property is not supported for the melee classlabel. You must now assign the animation banks to each weapon ODF as specified. When all of this is finished, munge your mission, anims, and side LVLs. You won't have to repeate steps 6-11 if followed correctly, unless you wish to add more weapons or change the assigned animations.
Example of a functional Melee ODF using Primary Animation[WeaponClass]
ClassLabel = "melee"
[Properties]
IconTexture = "hud_knife_icon"
GeometryName = "MonkSpade"
AnimationBank = "tool" //overhead swing
CanDeflect = 0
Example of a functional Pistol ODF using Secondary Animation[WeaponClass]
ClassLabel = "cannon"
[Properties]
AnimationBank = "cannon" // not to be confused with classlabel cannon!
FireAnim = "2" // calls on human_lascannon_stand_shoot3
GeometryName = "coltrevolver"
ConclusionThere you have it, a builder and tutorial for everything needed to add custom weapon animations to your mods! You can improve these tools as needed but please retain the original readme and credits. If you have further questions or get stuck you can post on the thread for help. Also, if you find any animations that resemble a two-handed Scythe Sweep or a Spear Stab / Punch, please let me know.
Additional Informationhttp://www.swbfgamers.com/index.php?topic=8448
http://www.swbfgamers.com/index.php?topic=8089
CreditsPhobos - Custom Animation Builder, Batch Scripting, Discovering Animation Dummies & LasCannon Bank
MileHighGuy/Ginev - Yoda Animation Munger, Tutorials
Sereja - Tutorials, Helping Discover Custom Animations
Psych0fred - Assets, Mod Tools
Quote-----Bf1_yoda_v2_milehighguy readme-----
yoda bf1 version
my last link went down so heres a new one. it has bf2 animations by replacement of the gammorean's animations
there can only be 1 set of gamorean animations per map, i think.
I could not get his low res animation to stop stretching so i just used the high res.
I have included the unmunged animations so you can see how i did it.
i think the only way to get custom animations without modifying the common lvl is by using "gam" in the weapon and the new animation in the soldier odf.
credit me if you use.
credits:
pandemic/lucasarts: original art/odfs
Nice work--and thanks for the detailed write-up.
:cheers:
It's great to know that new builders are still coming out. :)